1-Axis Motorized Micromanipulator

MU1

  • Manual positioning in x, y, z
  • Motorized z-axis with 0.1 µm resolution
  • Software Profix included for microprofiling applications
  • USB plug & play with Profix
  • No external control box needed

The micromanipulator MU1 enables automized microprofile measurements with microsensors. It consists of a compact manual micromanipulator for the x-, y-, and z-axis, supplemented with a high-precision motorized slide (0.1 µm resolution) for the z-axis. The motor controller is integrated in the housing, no external control box is needed. The versatile control software Profix for automized microprofiling is included. If no computer is connected, the motor can be operated by a control knob integrated on top of the MU1 housing. For best operation conditions, the micromanipulator MU1 should be mounted on the Heavy Stand HS1 from PyroScience. The MU1 can easily be upgraded to the Micromanipulator MUX2, which additionally provides a motorized x-axis for automized measurements of microprofile transects.

Specifications:

 
Weight 1.9kg
Dimensions 95 x 220 x 275mm
Sensor holder Clamp for shaft diameters from 6.5 to 12mm
x / y / z axis travel range (manual) 20 / 25 / 37mm
x / y / z axis resolution (manual) ca. 100µm / ca. 100µm / ca.10µm
z axis motor travel range 75mm
Max. motor velocity 2mm/s
z-axis resolution (motor) 0.1µm
z-axis repeatability (motor) <2µm
Interface USB
Power supply 100-240V AC, universal international plug adapter included
Operating temperature 0 to 50°C
Max. rel. humidity 95% non condensing
Options on request Travel range: 150mm

 

One single optical fiber sensor can be attached to this micromanipulator and only the following meters are compatible to the included microprofiling software Profix:

1-channel FireStingO2 (FSO2-1)
2-channel FireStingO2 (FSO2-2)

Micromanipulator Setup

Our recommendation for a basic and ready to go micromanipulator setup:
FireStingO2 (FSO2-1)
Fixed Fiber Oxygen Microsensor (OXF50)
Manual Micromanipulator (MU1)
Heavy stand (HS1)

Heavy Stand for Micromanipulators

HS1

  • Recommended for the heavy MU1 & MUX2
  • Height 500mm
  • Weight 10kg

Light Stand for Micromanipulators

LS1

  • Recommended for the light weight MM33
  • Height 500mm
  • Weight 4.5kg