search

OEM module for optical temperature sensors

PICO-T

  • 1-channel OEM device
  • For read-out of optical temperature sensor spots
  • Compact dimensions: 59 x Ø17mm
  • UART interface, very low power consumption

OEM module for optical temperature sensor spots

The ultra-compact Pico-T is a fiber-optic meter for optical temperature sensors intended for OEM applications based on the proven high-precision REDFLASH technology from PyroScience. It features very low power consumption, contactless read-out of optical temperature sensors through transparent vessel walls. 

This OEM module features one optical channel with a PICO-connector, compatible to temperature sensor spots with contactless read-out (must be purchased separately).

Pico-T comes with a standard UART interface for integration into custom electronics. In addition, we offer a USB adapter cable PICO-USB including a license for the Pyro Workbench software. When connected to this USB adapter cable, the Pico-T can be comfortably configured and operated with a PC using this versatile software.

For calibration of the optical temperature sensor, it is possible to solder a Pt100 temperature probe without connector (TSUB21-NC) to the OEM module. 

Innovative REDFLASH technology. The REDFLASH technology from PyroScience is based on the unique analyte-sensitive REDFLASH sensor materials. The REDFLASH sensor materials are excitable with red light and show an analyte-dependent luminescence in the near infrared (NIR). The REDFLASH technology impresses by its high precision, high reliability, low power consumption, low cross-sensitivity, and fast response times. The red light excitation significantly reduces interferences caused by autofluorescent samples. Further, the NIR detection technology significantly reduces interference with ambient light, known from the old blue-light techniques.

LabVIEW library. For customer software solutions, a fully functional LabVIEW library is available in the downloads tab. On request, a respective Python library (in beta version) and the communication protocol will be send to you. Just let us know.

See also our Pico OEM modules for pH and oxygen sensors. 

Our customers successfully integrated our OEM parts in a variety of different systems for diverse applications. If your application needs a different solution, we can advice you with our yearlong experience in OEM integration. Please contact us for our special OEM support of our engineers. Contact OEM Support

Compatible Optical Temperature Sensors

Pico-T is compatible to optical temperature sensors spots with contactless read-out using optical fibers/rods with PICO-connector.

Pt100 probe for calibration

Pt100 Temperature Probe

TSUB21-NC

  • Flexible Teflon-coated temperature probe
  • With no connector (-NC), for soldering
  • Tip and cable are completely submersible in water

Evaluation Kit

For contactless measurements

  • PICO-T, PICO-USB cable and TSP5
  • PICROD3 fiber rod (ca. 5cm) for read-out
  • All necessary accessories

Optical Fiber Rod

PICROD3

  • For contactless sensor readout
  • PICO-connector, Ø = 3mm, 51.5mm length
  • To measure O2 sensor spots through 0-20mm thick transparent windows

Fiber for Contactless Readout

PICFIB2

  • Fiber diameter Ø = 2mm
  • With PICO-connector, ca. 1m length
  • To measure O2 sensor spots through 0-10mm thick transparent windows

USB Interface Cable

PICO-USB

USB interface cable for evaluation of PICO-O2, PICO-PH and PICO-T, incl. versatile logger software for easy setup and calibration

Pt100 Temperature Probe

TSUB21-NC

  • Flexible Teflon-coated temperature probe
  • With no connector (-NC), for soldering
  • Tip and cable are completely submersible in water