Fixed Fiber pH Minisensor
PHF500-PK6.5
- Measurement range pH 5.5 - 7.5
- Fixed in a needle, tip protruding 5mm
- Tip diameter 500µm
- for fast pH measurements (t90 at 25°C < 10 sec)
- Without optical isolation
Fixed Fiber pH Minisensor
PHF500-PK8
- Measurement range pH 7.0 - 9.0
- Fixed in a needle, tip protruding 5mm
- Tip diameter 500µm
- for fast pH measurements (t90 at 25°C < 10 sec)
- Without optical isolation
Robust Oxygen Probe
OXROB10
- Stainless steel 10cm long, 3mm in diameter
- Works in gas (%oxygen) and liquids (DO)
- No oxygen consumption
- Optically isolated (OI)
- Negligible drift
Insertable Oxygen Miniprobe
OXIMP500
- Bare Optical fiber 500 µm in diameter
- Enlarged sensing surface over 3-5mm length at the sensor tip
- For measurements of smoothed oxygen levels in samples with micro-heterogeneities
High Speed Robust Oxygen Probe
OXROB10-HS
- Robust probe for fast measurements
- Stainless steel 10cm long, 3mm in diameter
- High speed oxygen sensor (T90 < 0.5s gas,< 3s water)
- Works in gas (%oxygen) and liquids (DO)
- Optically Isolated, usable in photosynthetic samples
Insertable Oxygen Miniprobe
OXIMP1000
- Bare Optical fiber 1000 µm in diameter
- Enlarged sensing surface over 3-5mm length at the sensor tip
- For measurements of smoothed oxygen levels in samples with micro-heterogeneities
Insertable Oxygen Miniprobe
OXIMP250
- Bare Optical fiber 250 µm in diameter
- Enlarged sensing surface over 3-5mm length at the sensor tip
- For measurements of smoothed oxygen levels in samples with micro-heterogeneities
Robust Screw Cap Oxygen Probe
OXROBSC
- Robust probe with 2 oxygen screw cap sensors
- Stainless steel 10cm long, 4mm in diameter
- Works in gas (%oxygen) and liquids (DO)
- No oxygen consumption
- Optically isolated (OI)
Robust Screw Cap Oxygen Probe
OXROBGSC-CL5
- Robust screw probe with 2 oxygen screw caps
- Stainless steel 10cm long, 4mm in diameter
- 5m cable length (-CL5)
- Works in gas (%oxygen) and liquids (DO)
- Optically isolated (-OI)
Oxygen Sensor Spots
OXSP5
- Sensor spots (8 pcs.) 5mm in diameter
- Autoclavable (few times, short cycle)
- Works in gas (%oxygen) and in liquids (DO)
- No oxygen consumption
- Negligible drift
Self-Adhesive Oxygen Sensor Spots
OXSP5-ADH
- Self-adhesive sensor spots (8 pcs.) 5mm in diameter
- For measurements in closed containers
- Works in gas (%oxygen) and in liquids (DO)
- No oxygen consumption
- Negligible drift
pH Sensor Spots
PHSP5-PK7
- Sensor spots (8 pcs.) 5mm in diameter
- For measurements in closed containers
- Precalibrated for plug & play measurements
- Contamination-free non-invasive measurement
- Autoclavable
Self-Adhesive pH Sensor Spots
PHSP5-PK7-ADH
- Self-adhesive sensor spots (8 pcs.) 5mm in diameter
- For measurements in closed containers
- Precalibrated for plug & play measurements
- Contamination-free non-invasive measurement
- Autoclavable
pH Sensor Spots
PHSP5-PK8
- Sensor spots (8 pcs.) 5mm in diameter
- For measurements in closed containers
- Precalibrated for plug & play measurements
- Contamination-free non-invasive measurement
- Autoclavable
Self-Adhesive pH Sensor Spots
PHSP5-PK8-ADH
- Self-adhesive sensor spots (8 pcs.) 5mm in diameter
- For measurements in closed containers
- Precalibrated for plug & play measurements
- Contamination-free non-invasive measurement
- Autoclavable
pH Sensor Spots
PHSP5-PK5
- Sensor spots (8 pcs.) 5mm in diameter
- For measurements in closed containers
- Precalibrated for plug & play measurements
- Contamination-free non-invasive measurement
- Autoclavable
pH Sensor Spots
PHSP5-PK6
- Sensor spots (8 pcs.) 5mm in diameter
- For measurements in closed containers
- Precalibrated for plug & play measurements
- Contamination-free non-invasive measurement
- Autoclavable
pH Sensor Spots
PHSP5-PK8T
- Sensor spots (8 pcs.) 5mm in diameter
- For marine measurements on pH total scale
- For measurements in closed containers
- Precalibrated for plug & play measurements
- Contamination-free non-invasive measurement
Self-Adhesive pH Sensor Spots
PHSP5-PK5-ADH
- Self-adhesive sensor spots (8 pcs.) 5mm in diameter
- For measurements in closed containers
- Precalibrated for plug & play measurements
- Contamination-free non-invasive measurement
- Autoclavable
Self-Adhesive pH Sensor Spots
PHSP5-PK8T-ADH
- Self-adhesive sensor spots (8 pcs.) 5mm in diameter
- For marine measurements on pH total scale
- Precalibrated for plug & play measurements
- Contamination-free non-invasive measurement
Oxygen Nanoprobes
OXNANO
- Dispersible oxygen nanoparticles
- Ideal for microfluidics or lab-on-a-chip
- For measurement in complex geometries
- Autoclavable (few times, short cycle)
- Real-time response
Robust Screw Cap Oxygen Probe
OXROBGSC-CL10
- Robust screw probe with 2 oxygen screw caps
- Stainless steel 10cm long, 4mm in diameter
- 10m cable length (-CL10)
- Works in gas (%oxygen) and liquids (DO)
- Optically isolated (-OI)
Robust Screw Cap Oxygen Probe
OXROBGSC-CL20
- Robust screw probe with 2 oxygen screw caps
- Stainless steel 10cm long, 4mm in diameter
- 20m cable length (-CL20)
- Works in gas (%oxygen) and liquids (DO)
- Optically isolated (-OI)
Sterile Oxygen Flow-Through Cell
OXFLOW
- Flow-through cell with integrated optical oxygen sensor
- Sterilized using 25kGy beta-irradiation
- Luer lock adapters for ca. 3.2 or 4.8 mm ID tubings
- Works in gas (%oxygen) and liquids (DO)
Sterile Oxygen Flow-Through Cell
OXFLOW-HS
- Flow-through cell with integrated optical oxygen sensor
- Sterilized using 25kGy beta-irradiation
- Luer lock adapters for 3.2 or 4.8 mm ID tubings
- Works in gas (%oxygen) and liquids (DO)
- High speed response time (t90 < 1s)
Sterile Trace Range Oxygen Flow-Through Cell
TROXFLOW
- Flow-through cell with integrated optical oxygen sensor
- Sterilized using 25kGy beta-irradiation
- Luer lock adapters for ca. 3.2 or 4.8 mm ID tubings
- Works in gas (%oxygen) and liquids (DO)
- For high precision measurements close to 0% oxygen
Sterile Temperature Flow-Through Cell
TPFLOW
- Flow-through cell with integrated optical temperature sensor
- Luer-lock T-Connector with removable temperature mini probe
- Sterilized using 25kGy beta-irradiation
- Luer lock adapters for ca. 3.2 or 4.8 mm ID tubings
Oxygen Flow-Through Cell
OXFTC
- With integrated contactless optical oxygen sensor
- Luer-lock with tubing adapters
- For ca. 1.6 or 2.4 mm ID tubings
- Recommended flow rate: 10-100 mL/min
Oxygen & Temperature Respiration Vial
TOVIAL20
- 20 ml vial with integrated oxygen & temp sensor
- Diameter / height: ca. 28 mm / ca. 61 mm
- Measures oxygen gas (%oxygen) or dissolved oxygen (DO)
- Measurement range temp 0°C - 50°C
- True temperature compensation possible
Oxygen & pH & Temperature Vial
PHTOVIAL20-PK7
- 20 ml vial with integrated pH + temp + oxygen sensor
- Diameter / height: ca. 28 mm / ca. 61 mm
- Measurement range pH 6.0-8.0
- Measurement range temp 0°C - 50°C
- True temperature compensation
Oxygen & pH & Temperature Vial
PHTOVIAL20-PK8
- 20 ml vial with integrated pH + temp + oxygen sensor
- Diameter / height: ca. 28 mm / ca. 61 mm
- Measurement range pH 7.0-9.0
- Measurement range temp 0°C - 50°C
- True temperature compensation
Sterile pH Flow Through Cell
PHFLOW-PK7
- Flow-through cell with integrated optical pH sensor
- Luer-lock T-Connector with removable pH mini probe
- Precalibrated for plug & play sterile measurements
- Sterilized using 25kGy beta-irradiation
- Luer lock adapters for ca. 3.2 or 4.8 mm ID tubings
Sterile pH Flow Through Cell
PHFLOW-PK8
- Flow-through cell with integrated optical pH sensor
- Luer-lock T-Connector with removable pH mini probe
- Precalibrated for plug & play sterile measurements
- Sterilized using 25kGy beta-irradiation
- Luer lock adapters for ca. 3.2 or 4.8 mm ID tubings
Sterile pH Flow Through Cell
PHFLOW-PK5
- Flow-through cell with integrated optical pH sensor
- Luer-lock T-Connector with removable pH mini probe
- Precalibrated for plug & play sterile measurements
- Sterilized using 25kGy beta-irradiation
- Luer lock adapters for ca. 3.2 or 4.8 mm ID tubings
Sterile pH Flow Through Cell
PHFLOW-PK6
- Flow-through cell with integrated optical pH sensor
- Luer-lock T-Connector with removable pH mini probe
- Precalibrated for plug & play sterile measurements
- Sterilized using 25kGy beta-irradiation
- Luer lock adapters for ca. 3.2 or 4.8 mm ID tubings
pH Sensor Cap for Underwater Devices
PHCAP-PK8T-SUB
- Total Scale pH measurement
- Robust optical pH sensor caps (4 pcs.)
- For all devices with -SUB connector
- Minimize maintenance by simply exchanging the cap
- Minimal cross-sensitivity to high ionic strength
pH Sensor Cap for Underwater Devices
PHCAP-PK8-SUB
- Robust optical pH sensor caps (4 pcs.)
- For all devices with -SUB connector
- Minimize maintenance by simply exchanging the cap
- Measurement range pH 7.0-9.0
- Minimal cross-sensitivity to high ionic strength
pH Sensor Cap for Underwater Devices
PHCAP-PK7-SUB
- Robust optical pH sensor caps (4 pcs.)
- For all devices with -SUB connector
- Minimize maintenance by simply exchanging the cap
- Measurement range pH 6.0-8.0
- Minimal cross-sensitivity to high ionic strength
Fixed Fiber Oxygen Microsensor
OXF50
- Fixed sensor tip surrounded by needle
- Sensor tip protrudes ca. 6mm
- 50-70µm sharp sensor tip
- Works in gas (%oxygen) and liquids (DO)
- No oxygen consumption
Robust Oxygen Probe
OXROB3
- Stainless steel 3cm long, 3mm in diameter
- Works in gas (%oxygen) and liquids (DO)
- No oxygen consumption
- Optically isolated (OI)
- Negligible drift
Robust pH Screw Cap Probe
PHROBSC-PK7
- Measurement range pH 6.0-8.0
- Robust fiber with threaded tip
- Exchangeable Sensor Screw Caps
- Precalibrated for plug & play measurements
- For small amounts of stirred liquid
Robust pH Screw Cap Probe
PHROBSC-PK8
- Measurement range pH 7.0-9.0
- Robust fiber with threaded tip
- Exchangeable Sensor Screw Caps
- Precalibrated for plug & play measurements
- For small amounts of stirred liquid
Robust pH Screw Cap Probe
PHROBSC-PK5
- Measurement range pH 4.0-6.0
- Robust fiber with threaded tip
- Exchangeable Sensor Screw Caps
- Precalibrated for plug & play measurements
- For small amounts of stirred liquid
Robust pH Screw Cap Probe
PHROBSC-PK6
- Measurement range pH 5.0-7.0
- Robust fiber with threaded tip
- Exchangeable Sensor Screw Caps
- Precalibrated for plug & play measurements
- For small amounts of stirred liquid
Robust pH Screw Cap Probe
PHROBSC-PK8T
- For marine measurements on pH total scale
- Robust fiber with threaded tip
- Exchangeable Sensor Screw Caps
- Precalibrated for plug & play measurements
- For small amounts of stirred liquid
pH Robust Screw Cap Probe
PHROBSC-PK8T-SUB
- For marine measurements on pH total scale
- Robust fiber with threaded tip
- Exchangeable Sensor Screw Caps
- Minimal cross-sensitivity to high ionic strength
- With underwater SUB-connector (-SUB)
- For long-term measurements
pH Robust Screw Cap Probe
PHROBSC-PK7-SUB
- For pH measurements between pH 6.0-8.0
- Robust fiber with threaded tip
- Exchangeable Sensor Screw Caps
- Minimal cross-sensitivity to high ionic strength
- With underwater SUB-connector (-SUB)
- For long-term measurements
pH Robust Screw Cap Probe
PHROBSC-PK8-SUB
- For pH measurements between pH 7.0-9.0
- Robust fiber with threaded tip
- Exchangeable Sensor Screw Caps
- Minimal cross-sensitivity to high ionic strength
- With underwater SUB-connector (-SUB)
- For long-term measurements
Oxygen Respiration Vial
OXVIAL20
- 20 ml vial with integrated oxygen sensor
- Diameter / height: ca. 28 mm / ca. 61 mm
- For small scale respirometry
- Lids with septum
- Measures oxygen gas (%oxygen) or dissolved oxygen (DO)
Oxygen Respiration Vial
OXVIAL4
- 4 ml vial with integrated oxygen sensor
- Diameter / height: ca. 15 mm / ca. 48 mm
- For small scale respirometry
- Lids with septum
- Measures oxygen gas (%oxygen) or dissolved oxygen (DO)
Fixed Fiber Oxygen Minisensor
OXF1100
- Fixed sensor tip surrounded by needle
- Sensor tip protrudes ca. 2mm
- Works in gas (%oxygen) and liquids (DO)
- No oxygen consumption
- Negligible drift
Temperature Sensor Spots
TPSP5
- Sensor spots (8 pcs.) 5mm in diameter
- Measurement range 0°C - 50°C
- For true temperature compensation
- Works in gas and in liquids
- Negligible drift
Trace Range Oxygen Sensor Spots
TROXSP5
- Sensor spots (8 pcs.) 5mm in diameter
- For high precision measurements close to 0% O2
- Works in gas (%oxygen) and in liquids (DO)
- No oxygen consumption
- Negligible drift
Trace Range Robust Oxygen Probe
TROXROB3
- Stainless steel 3cm long, 3mm in diameter
- For high precision measurements close to 0% oxygen
- Works in gas (%oxygen) and liquids (DO)
- No oxygen consumption
- Optically isolated (OI)
Trace Range Robust Oxygen Probe
TROXROB10
- Stainless steel 10cm long, 3mm in diameter
- For high precision measurements close to 0% oxygen
- Works in gas (%oxygen) and liquids (DO)
- No oxygen consumption
- Optically isolated (OI)
Robust Oxygen Probe
OXROB10-SUB
- Stainless steel 10cm long, 3mm in diameter
- With underwater SUB-connector (SUB)
- No oxygen consumption
- Optically isolated (OI)
- Negligible drift
Robust Oxygen Probe
OXROB10-CL4
- Stainless steel 10cm long, 3mm in diameter
- 4m cable length (CL4)
- Works in gas (%oxygen) and liquids (DO)
- Optically isolated (OI)
- Negligible drift
Robust Screw Cap Oxygen Probe
OXROBSC-SUB
- Robust screw cap probe with 2 oxygen screw cap sensors
- Stainless steel 10cm long, 4mm in diameter
- Works in gas (%oxygen) and liquids (DO)
- No oxygen consumption
- Optically isolated (OI)
- With underwater connector (-SUB)
Robust Oxygen Probe
OXROB3-CL4
- Stainless steel 3cm long, 3mm in diameter
- 4m cable length (CL4)
- Works in gas (%oxygen) and liquids (DO)
- Optically isolated (OI)
- Negligible drift
Robust Oxygen Probe
OXROB3-SUB
- Stainless steel 3cm long, 3mm in diameter
- With underwater SUB-connector (SUB)
- No oxygen consumption
- Optically isolated (OI)
- Negligible drift
Fixed Fiber Oxygen Microsensor
OXF50-UHS
- Fixed sensor tip surrounded by needle
- Sensor tip protrudes ca. 6mm
- 50-70µm sharp sensor tip
- Ultra-high speed response time (t90 < 0.3s)
- Works in gas (%oxygen) and liquids (DO)
Fixed Fiber Oxygen Microsensor
OXF50-HS
- Fixed sensor tip surrounded by needle
- Sensor tip protrudes ca. 6mm
- 50-70µm sharp sensor tip
- High speed response time (t90 < 0.8s)
- Works in gas (%oxygen) and liquids (DO)
Fixed Fiber Oxygen Microsensor
OXF50-UHS-SUB
- Fixed sensor tip surrounded by needle
- Sensor tip protrudes ca. 6mm
- 50-70µm sharp sensor tip
- Ultra-high speed response time (t90 < 0.3s)
- With underwater SUB-connector (SUB)
Fixed Fiber Oxygen Microsensor
OXF50-OI
- Fixed sensor tip surrounded by needle
- Sensor tip protrudes ca. 6mm
- 50-70µm sharp sensor tip
- Optically isolated (OI)
- Works in gas (%oxygen) and liquids (DO)
Fixed Fiber Oxygen Minisensor
OXF1100-UHS
- Fixed sensor tip surrounded by needle
- Sensor tip protrudes ca. 2mm
- Ultra-high speed response time (t90 < 0.3s)
- Works in gas (%oxygen) and liquids (DO)
- Negligible drift
Fixed Fiber Oxygen Minisensor
OXF1100-HS
- Fixed sensor tip surrounded by needle
- Sensor tip protrudes ca. 2mm
- High speed response time (t90 < 0.8s)
- Works in gas (%oxygen) and liquids (DO)
- Negligible drift
Bare Fiber Oxygen Minisensor
OXB430-UHS
- Optical fiber 430µm in diameter
- Ultra-high speed response time (t90 < 0.3s)
- Works in gas (%oxygen) and liquids (DO)
- No oxygen consumption
- Negligible drift
Bare Fiber Oxygen Minisensor
OXB430-HS
- Optical fiber 430µm in diameter
- High speed response time (t90 < 0.8s)
- Works in gas (%oxygen) and liquids (DO)
- No oxygen consumption
- Negligible drift
Pt100 Temperature Probe
TDIP15
- Stainless steel temperature dipping probe
- Robust tip and shielded cable
- With LEMO-connector
- Only tip submersible in water
- Fast response time (2s/1min in water/air)
Pt100 Temperature Probe
TSUB21
- Flexible Teflon-coated temperature probe
- With LEMO-connector
- Tip and cable are completely submersible in water
- Response time ca. 8s/1min in water/air
Pt100 Temperature Probe
TSUB21-NC
- Flexible Teflon-coated temperature probe
- With no connector (-NC) for Pt100 soldering
- Tip and cable are completely submersible in water
- Response time ca. 8s/1min in water/air
Pt100 Temperature Probe
TSUB21-CL1
- Flexible Teflon-coated temperature probe
- Shorter 1m cable length (CL1)
- Tip stable in approved solvents (with OXSOLV sensor)
- With LEMO-connector
Pt100 Temperature Probe
TSUB21-CL20
- Flexible Teflon-coated temperature probe
- Extended 20m cable length (CL20)
- For oxygen sensors with cable length >5m
- With LEMO-connector
- Tip and cable are completely submersible in water
Pt100 Temperature Probe
TSUB21-CL5
- Flexible Teflon-coated temperature probe
- Extended 5m cable length (CL5)
- For oxygen sensors with cable length of 4m (-CL4)
- With LEMO-connector
- Tip and cable are completely submersible in water
Would you like to stay informed?
