Oxygen sensor spots allow oxygen measurements in closed sample containers with contactless read-out through a transparent window (glass, acryl glass) with special adapters and optical fibers for all types of fiber-optic meters from PyroScience. This enables incubations in closed systems, preventing potential contamination and simplifying oxygen monitoring without sampling, also in combination with pH and temperature sensor spots.
Self-adhesive technology. The spots are equipped with a self-adhesive glue on the backside of the spot for easy integration into transparent plastic or glass containers. This eliminates the use of glue and potential contamination of the spot. For information on adhesive properties, please refer to the technical note in the download tab. For measurement conditions where detachment of the spot can occur, it is advised to use the standard spots with SPGLUE.
Standard range. This sensor is specified for an optimum measuring range of 0 to 500 hPa oxygen (0 -250% air saturation). However, without specifications, it is possible to measure in up to 1 bar pure oxygen/100% oxygen saturation/100% oxygen. For detailed specifications, see the respective pdf file in the Downloads tab.
Optical isolation. For applications at high ambient light (e.g. direct sunlight, illuminated samples) and in fluorescing / light-sensitive samples, an additional optical isolation (-OI) protection layer is added to the sensor surface to reduce enhanced sensor aging and to avoid interference with the oxygen measurements
Easy calibration. A simple ambient air calibration can be performed with a few clicks (<1 minute for equilibrated setup). For precise oxygen measurements close to 0% we also offer easy-to-use calibration capsules (OXCAL). Simply dissolve the content of one calibration capsule in 50 ml distilled water, wait 10-15 minutes, perform the 0% calibration and start measurements with a calibrated sensor. For detailed calibration recommendations refer to the manual in the downloads tab.
Standard stock item. This item is typically in stock and small numbers can be shipped quickly. This does not apply for larger amounts, which ship with standard delivery time.
Good value. This product is a basic sensor for applications with no special requirements (like ultra fast response times, resistance to solvents, low detection limit)
Top seller. This product is one of our top sellers and can be used for multiple and versatile applications.
Applications. To get an overview of potential applications and to see our sensors in action, please visit our Applications site!
Every PyroScience oxygen meter is generally compatible to this sensor. Pay attention to the correct optical fiber for contactless readout. All options can be found under accessories for contactless readout. Use the link below to get a list of all compatible meters. Select additional requirements to find the optimal meter for you and your application!