This robust pH screw cap probe represents a new generation of fiber-based pH sensors from PyroScience and a viable alternative to traditional pH electrodes. This new sensor format is composed of a robust cap adapter fiber with stainless-steel tip (10cm length, ø4mm) and a disposable plastic screw cap with integrated pH sensor. The pH sensor cap can be screwed on the threaded tip of the robust fiber. If worn out, keep the fiber and simply exchange the pH sensor cap and continue with your pH measurements. The PHROBSC-PK7 comes initially with 4 sensor caps. If more caps are required, an additional set of 4 pH sensor screw caps (PHSC-PK7) can be obtained.
With this new sensor format, PyroScience aims to provide a more sustainable approach (reducing waste) and improve even further the user-friendliness of our sensors.
pH range 6.0-8.0 This sensor is specified for the pH range 6.0-8.0. For detailed specifications, see the respective pdf file in the Downloads tab.
Screw cap probe. For easy and sustainable renewing of the sensor after demanding applications. Replacement screw caps can be found under accessories. Tip diameter 4mm.
Optical isolation.This sensor type is equipped with an additional optical isolation protection layer. This layer reduces enhanced sensor aging and interference with the measurements in applications at high ambient light (e.g. direct sunlight, illuminated samples) and in fluorescing / light-sensitive samples.
Easy calibration. Calibration of the pH sensors is performed at pH 2 and pH 11 using our easy-to-use calibration capsules (PHCAL2 and PHCAL11). For detailed calibration recommendations, please refer to the manual in the downloads tab.
ST-connector. This connector is our standard sensor connector for PC-operated and handheld FireSting devices.
Standard stock item. This item is typically in stock and small numbers can be shipped quickly. This does not apply for larger amounts, which ship with standard delivery time.
Applications. To get an overview of potential applications and to see our sensors in action, please visit our Applications site!
Every PyroScience pH meter with a ST-connector is compatible to this sensor. Use this link to get a list of all compatible meters. Select additional requirements to find the optimal meter for you and your application!